Elektromehanički sigurnosni prekidači sa zaključavanjem
Filteri
Elektromehanički sigurnosni prekidači sa zaključavanjem
Electromechanical safety switches with guard locking with metal or plastic housing
EUCHNER Safety switch TZ1LE110MVAB-C1828; 094311
Safety switch TZ, escape release with key button Auxiliary release on the front Escape release on the rear side with key button Two LED displays, red and green Actuating
-
(Trenutno nema na stanju)
0,00
EUCHNER Safety switch TP2-538K024SR6; 088215
Safety switch TP, plug connector SR6, without door monitoring contact, increased vertical overtravel Auxiliary release on the front Without door monitoring contact
-
(Trenutno nema na stanju)
0,00
EUCHNER Actuator for safety switches NZ.VZ, NZ.VZ.VS and TZ
euchner-actuator-for-safety-switches-nz.vz-nz.vz.vs-and-tz
-
(Trenutno nema na stanju)
0,00
EUCHNER Safety switch TZ1RE110MVAB; 088024
Safety switch TZ Auxiliary release on the front Two LED displays, red and green Actuating head fitted right
-
(Trenutno nema na stanju)
0,00
EUCHNER Safety switch TP2-528A110SR6; 087444
Safety switch TP, plug connector SR6, without door monitoring contact Auxiliary release on the front Without door monitoring contact Increased horizontal overtr
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Safety switch TZ2LE220M; 088031
Safety switch TZ Auxiliary release on the front Two LED displays, red and green Actuating head fitted left
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Safety switch TZ1RE024SR11-C1816; 077042
Safety switch TZ, plug connector SR11, release with pushbutton Release on the front with pushbutton Two LED displays, red and green Plug connector SR11 Actuating
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Safety switch TZ TZ1LE110MVAB; 088023
Safety switch TZ Auxiliary release on the front Two LED displays, red and green Actuating head fitted left
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Safety switch STP3A-4141A024RC18C1993EXT4; 109399
Safety switch STP, plug connector RC18, with door monitoring contact, escape release, 2 illuminated pushbuttons Actuating head made of metal Escape release on the
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Safety switch TP2-4131A024SR11; 088203
Safety switch TP, plug connector SR11, without door monitoring contact Auxiliary release on the front Without door monitoring contact Increased horizontal overtravel
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Safety switch TX2C-A024RC18; 082940
Safety switch TX, plug connector M23 (RC18) Auxiliary release on the front With door monitoring contact Plug connector M23 (RC18)
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Safety switch TZ2LE024RC18VAB-C1828; 093103
Safety switch TZ, plug connector RC18, escape release with key button Auxiliary release on the front Escape release on the rear side with key button Two LED displays,
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Safety switch TZ1RE024RC18VAB-C2140; 098298
Safety switch TZ, plug connector RC18, escape release with pushbutton Auxiliary release on the front Escape release on the rear with pushbutton Two LED displays,
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Safety switch TP4-4141A024SEM4AS1; 088257
Safety switch TP AS1, plug connector M12 (open-circuit current principle) Auxiliary release on the front Increased horizontal overtravel Optionally without guard
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Safety switch TZ1LE024SR11-C1684; 070886
Safety switch TZ, plug connector SR11, escape release with pushbutton Auxiliary release on the front Escape release on the rear side with pushbutton Two LED displays,
-
(Trenutno nema na stanju)
Cena na upit
Elektromehanički sigurnosni prekidači sa zaključavanjem
Safety switch with guard locking and without guard lock monitoring NZ.VZ.VS
Safety switch NZ.VZ.VS has magnetic guard locking. The guard cannot be opened when locked. Series NZ.VZ.VS safety switches are switches of type 2. They have anodic oxidized die-cast housings designed according to EN50041.Features
- Solenoid operating voltage optionally 24 VDC / 110 VAC / 230 VAC
- With 2 switching contacts or with 4 switching contacts
- LED function display for different voltage ranges
- Mechanically locked, release by applying voltage
- Electrically locked, locking by applying voltage
Safety switch TZ with guard locking and guard lock monitoring
The safety switch TZ has magnetic guard locking with additional interlocking monitoring system. Consequently, the position of the door and the solenoid can be monitored by the higher-level control system. Series TZ safety switches are switches of type 2. They differ in the locking method, solenoid operating voltage, actuating head, switching contacts used, as well as the connection.Features
- Auxiliary release from the front
- Optionally with escape release
- LEDs for function display
- Connection via cable entry or plug connector
- Max. 8 switching contacts permit flexible wiring
Safety switch STA
The robust metal safety switch STA is physically compatible with the proven EUCHNER safety switches TP and STP in the plastic housing. Due to its die-cast aluminum housing and the high degree of protection, IP67, the switch can withstand even extreme ambient conditions. Like the switches TP and STP, the safety switch STA also has guard locking and guard lock monitoring. A large selection of switching elements is available. The switching contacts switch a minimum current of 1 mA. The safety switch STA is therefore also suitable for use in safe control systems.Features
- Robust design
- 3 cable entries
- High degree of protection IP 67
- LED optional
Safety switch TX with guard locking and guard lock monitoring
Because of its slim design, the safety switch TX is excellent for mounting on the profiles of guard fences.Features
- Auxiliary release from the front
- 2 LEDs for function display
- Large insertion funnel
- Pulling the actuator does not prevent the switch from being released
- 3 cable entries
- Simple head changing
Safety switch with guard locking TQ
The TQ series is designed with compact dimensions of 75 x 75 x 15 mm, so that installation is possible even in cases where space is much too tight for other guard locking devices. Despite its small size, this safety switch has five switching contacts and a status LED.The auxiliary release accessible from three sides and the well thought-out fastening concept create plenty of space during attachment. The device has non-safe contacts for monitoring the guard locking. Use only as guard locking for process protection.
Features
- Use as guard locking for process protection
- Monitoring contact for the guard locking position
- Auxiliary release from 3 sides
Safety switch with guard locking and guard lock monitoring TP
The safety switches TP ensure that guards remain in the closed position until a hazardous movement, e.g. an over-traveling main spindle, has come to a standstill.Similarly, opening of the guard during a process is prevented. Thanks to their slim design, they are ideal for universal mounting on profile rails. Safety switches TP have reinforced plastic housings. They thus provide ideal installation opportunities for the automation, assembly and handling technology sectors.
Features
- Electrical or mechanical guard locking
- Different switching contacts
- 3 cable entries, optionally with plug connector
Safety switch TK with guard locking and guard lock monitoring
Wherever typical safety switches of type 2 reach their limits, the TK is in its element. With a locking force of more than 5,000 N, it is set up for very high loads.The TK has guard lock monitoring and is equipped with safety switching contacts.
Simple principle of operation: If a safety system is to be locked, the guard locking pin prevents it from opening. The guard locking pin is retracted only after the guard locking solenoid is supplied with power. The guard can then be opened.
The pin position can be monitored via the safety switching elements.
Features
- Mounting on plastic housing TP with actuating head and locking pin made of metal
- High locking forces of well above 5,000 N
- Auxiliary release on the switch head
- Actuating element for auxiliary shutdown feature on front
Safety switch STP
Based on the plastic-encapsulated safety switch TP with guard locking, the safety switch STP features both an actuating head and an internal cam made of metal. As a result, the switch can be used for applications that require high locking forces (up to 2500 N).The safety switch STP has a switching element with 4 switching contacts. EUCHNER supplies the STP safety switch with various contact combinations (positively driven contacts / NO contacts).
Dual-channel wiring to achieve the maximum possible safety level is possible with all possible variants. Given the particular property of the switching contacts of switching a minimum current of 1 mA, the safety switch STP is also suitable for use on safe control systems.
Features
- Metal actuating head suitable for highest requirements
- Two LED displays (optional) for the visual display of the door position and the position of the solenoid
- Flexible connection options using three cable entries
- High degree of protection IP67
Safety switch STM with guard locking and guard lock monitoring
Due to its small design, the safety switch STM with plastic housing is particularly suitable for applications in which robustness is required in combination with small dimensions.Along with the variant with the plastic actuating head, the STM is also available with a metal actuating head and cam. This is particularly suitable for applications that require high locking forces (up to 2,000 N).
Features
- Plastic housing with actuating head optionally made of metal or plastic
- Safety switch type 2 with guard locking and guard lock monitoring
- Separate switching contact for guard lock monitoring (1 switching contact) and door monitoring (2 switching contacts)
- Suitable for door radii as small as 300 mm
- High degree of protection IP67