NOVUS N1200 Auto-adaptive PID Controller 48x48mm

N1200 Auto-Adaptive PID Controller

The N1200 process controller was designed for high performance control in the most demanding applications. Its advanced and consolidated Auto-Adaptive PID algorithm ensures fast and highly accurate response in very dynamic processes with complex profiles.
N1200 has the fastest sampling rate among competitors, which allows the PID control to actuate with great responsiveness ensuring the correct process dynamics. Both electronic robustness and anti-flame material enclosure comply with the main world-class approvals for industry devices.
Advanced configuration of all parameters and fine tuning can be easily and quickly achieved via the USB port by using the free-of-charge NOVUS configuration software.
Besides the standard parameters settings, N1200 also performs customized ramp and soak temperature profiles by programming up to 20 user-configured recipes or up to 180 segments.
Details
- Input Type: TC J, K, T, N, R, S, B, E, Pt100 0-20 mA, 4-20 mA, 0-50 mV, 0-5 Vdc, 0-10 Vdc
- Accuracy: Thermocouples J, K, T: 0.25 % of span ±1 °C; Thermocouples N, R, S, B: 0.25 % of span ± 3 °C; Pt100, 0-20 mA, 4-20 mA, 0-5 Vdc, 0-10 Vdc: 0.2 % of span
- Input Resolution: 32767 levels (15 bits)
- Sampling Rate: 55 samples per second
- Analog Output: 0-20 mA or 4-20 mA
- Output Resolution: 31000 levels
- Control Type: PID, PI, PD, P; On/Off
- Control Action: Heat or Cool
- Control Output: Type SSR Pulse; 4-20 mA control; Relay
- Open Sensor Detection: Loop Break / Heater breaker detection
- Alarm Types: Minimum, Maximum, Differential, Differential, Low, Differential High, Open Sensor, Ramp and Soak Event
- Optional: Relay, Two Digital Inputs or Outputs, RS-485, Heater break detection
- Communication: RS485 Modbus optional
- Ramp and Soak programs: 20 programs with 9 segments each
Safety: Password protected configuration
- Configuration Interface: USB type Mini B (powered)
- Power Supply: 100-240 Vac/dc; 12-24 Vdc
- Maximum Consumption: 9 VA
- Front Pannel: IP65 ; Polycarbonate (PC) UL94 V-2
- 48 x 48 x 110 mm (DIN 1/16); ABS+PC UL94 V-0
- Enclosure: IP20
- Operating Conditions: 5 to 50 °C (41 to 122 °F) and 0 to 80 % RH
- Approvals: CE, RoHS, Reach, UL, and cUL

<<< User manual >>>

The controller has input and output channels (I/O) that can assume multiple functions: control output, digital input, digital output, alarm output, and PV and SP retransmission. These channels are identified as I/O1, I/O2, I/O3, I/O4, and I/O5.
The basic controller model has the following features:
** I/O1 Relay Output SPST-NO
** I/O2 Relay Output SPST-NO
** I/O5 Current output, digital output, digital input
Optionally, other features can be added:
++ 3R I/O3 with SPDT relay output
++ DIO I/O3 and I/O4 as digital input and output channels
++ HBD Heater break detect
++ 485 Serial Communication

N1200-HC for heating/cooling apps
N1200-HC is an extraordinarily versatile process controller. It accepts in a single model all the sensors and signals used in the industry and provides the main output types required for the operation of diverse processes.
Configuration can be performed either directly on the controller or via the USB interface once QuickTune software has been installed on the computer to be used. Once connected to USB, the device will be recognized as a serial communication (COM) port operating with Modbus RTU protocol.
Through the USB interface, even if disconnected from the power supply, the configuration performed in a piece of equipment can be saved in a file and repeated in other pieces of equipment that require the same configuration.
Details
- Multi-sensor universal input, with no hardware change.
- Protection for open sensor in any condition.
- Two separate control outputs: heating and cooling.
- Self-tuning of PID parameters.
- Automatic / Manual function with bumpless transfer.
- Three alarm outputs in the basic version, with functions of minimum, maximum, differential (deviation), open sensor and event.
- Timer functions that can be associated to the alarms.
- Retransmission of PV or SP in 0-20 mA or 4-20 mA.
- Input for remote setpoint.
- Digital input with 5 functions.
- Programmable Soft Start.
- 20 setpoint profile programs with 9 segments each, with the ability to be linked together for a total of 180 segments.
- Password for parameters protection.
- Universal power supply

<<< User manual >>>

IDENTIFICATION
N1200 - 3R - 485 - 24V
  (A)       (B)    (C)    (D)

A: Controller Model:
-- N1200
-- N1200-HC
B: Optional I/O:
-- Blank (basic version, without I/O3 nor I/O4)
-- 3R (SPDT Relay in I/O3)
-- DIO (Digital I/Os in I/O3 and I/O4)
-- HBD (Burnt-Out Resistance detection)
C: Digital Communication:
-- Blank (basic version, without serial communication);
-- 485 (RS485, Modbus protocol)
D: Power Supply:
-- Blank (basic version, 100 to 240 Vac/dc input)
-- 24V (12 to 24 Vdc / 24 Vac input voltage)