NOVUS Temperature Controllers

N1030 - Temperature Controller

N1030 is a temperature controller that features a high performance PID algorithm in a compact housing, with only 35 mm depth.

Its compact construction and the convenient detachable connector provide an easy set up on short profile panels, optimizing the space and reducing costs. It has two outputs always available which can be configured both as a control or an alarm.

N1020 - Temperature Controller

The N1020 temperature controller has a high performance microprocessor, which can control complex and critical processes through the self-adaptive PID control algorithm that adjusts the PID parameters and obtains the best possible response for a PID controller.

The front panel of this process controller has dimensions of 48 x 24 mm and is suitable for applications with limited mounting space. It accepts multiple thermocouple types, Pt100 and 0-50 mV.

It is possible to configure the temperature controller using the front keyboard or the USB interface (in this case, with QuickTune, a free configuration software from NOVUS). When using the USB interface to configure the device, the N1020 temperature controller does not need to be powered from the rear terminals.

Details

- Version with RS485 serial communication
- Power supply: 100 to 240 Vac/dc or 12 to 24 Vdc / 24 Vac
- Compact, with a DIN 1/32 format (48 x 24 mm)
- USB interface 2.0, CDC class (virtual communications port), USB conector: mini B, Modbus RTU protocol
- High brightness red LED display
- Universal input: thermocouples, Pt100 RTD and 50 mV
- Auto-adaptive PID control
- PID parameters auto-tuning
- Dual output: 1 pulse and 1 relay
- Output funtions: control, alarm 1, alarm 2
- Configurable alarms with 8 different functions
- Alarm inhibit function at start up
- Programmable timer
- “F” key with 3 possible functions
- Soft-start function
- Measured value offset
- Minimum and maximum limits for SP setting
- Minimum and maximum limits for output value
- Access password for configuration protection
- Factory calibration settings restoration feature
- Silicone keypad
- Front pannel: IP65, polycarbonate UL94 V-2
- Enclosure: IP20, polycarbonate UL94 V-2
- CE and UL certifications

N1040 - Temperature Controller

The microprocessor based N1040 was conceived for low cost applications and yet achieving high degree of accuracy. It features a short depth enclosure of only 70 mm thus reducing panel space considerably. Another important innovation is the exclusive removable wiring connection block which translates into ease of use during installation process.

It accepts Pt100 RTDs and thermocouples types J, K and T and features two outputs for control and alarm, universal power supply and automatic tuning of the PID paramenters. The N1040 is set to be the lowest cost temperature controller in the market while keeping high performance standards.

Details

- Accepts thermocouples J, K, T and Pt100 RTD without any hardware change or recalibration
- Auto tuning of PID parameters

- Analog output: 0-20 mA or 4-20 mA (Optional)
- Outputs: up to three relay output (PRRR)
- The outputs are programmable for main control or alarm
- Alarm functions: low, high, differential, low differential, high differential, sensor break
- Two alarm functions can be directed to one single output
- A very efficient universal switching power supply provides high accuracy conditions even during mains voltage fluctuations
- Safe output function allows the user to set control output conditions in case of sensor break or failure
- LBD (Loop Break Detection) function detects failures in the control loop
- Simplified programming menu makes operator programming very easy
- Indelible electronic serial number with 8 digits can be accessed from the display
- Keypad protection prevents unauthorized programming changes
- Silicone rubber frontal keypad
- Dimensions: 48 x 48 mm, 1/16 DIN
- Front panel protecion: IP65
- Interface RS485

N1040T - Time and Temperature Controller

N1040T is an economic and efficient Time and Temperature controller, developed with modern technology and automatic tuning of PID parameters, ON-OFF control and totally configurable. It has a reduced depth flameproof plastic enclosure.

It has two independent timers with several operation modes that allow timer association to the controller output or to the temperature control.

It accepts Pt100 sensors and thermocouples types J/K/T with decimals on all sensors. It has a fast electrical connection coupler system that reduces installation time.
Single model with 4 configurable outputs for process control, alarm or timing. Configuration protection by password and factory calibration recovery.

Details
- Accepts thermocouples J, K, T and Pt100 RTD without any hardware change or recalibration
- Auto tuning PID
- Output: 2 relays SPST 1,5 A, 1 relay SPDT 3 A and 5 Vcc logic pulse (ideal for enabling Solid State Relays)
- The outputs are programmable for main control or alarm
- Alarm functions: low, high, differential, low differential, high differential, sensor break
- Two alarm functions can be directed to one single output
- Switching power supply 100~240 Vac, 24 Vdc optional
- Safe output function allows the user to set control output conditions in case of sensor break or failure
- Digital input
- Simplified programming menu makes operator programming easily
- Indelible electronic serial number with 8 digits can be accessed from the display
- Count up and countdown timer
- Adjustable break timing between 00:00 and 99:59 (hh:mm or mm:ss)
- Timer enabling through digital input, Set Point, keypad or by enabling the temperature control
- Timer output can be switched when the time finishes
- Silicone rubber keypad
- Front panel protecion: IP65
- Dimensions: 48 x 48 mm, 1/16 DIN
- CE and UL certification

N1050 LCD temperature PID controller

N1050 is an advanced high performance PID temperature controller featuring a vivid LCD display in a modern design package. It combines the proven robustness of NOVUS PID algorithm with a large and bright easy-to-read multicolor 11-segment LCD display with alphanumeric mnemonics and crystal clear status signaling.

Besides the PID auto-tuning capability, N1050 outputs PWM control mode through pulse or relay. Up to three optional output relays can be selected. It also features 5 ramp-and-soak profile programs, soft start output and timer function which complement the advanced features of the controller. With password protected, all parameters are configurable by the display menu, via USB port or optional RS485 Modbus interface.