Siemens Communication processor CP 1542SP-1 IRC; 6GK7542-6VX00-0XE0
Communications Processor CP 1542SP-1 IRC for connection of an SIMATIC S7-ET 200SP to Industrial Ethernet, SINAUT ST7, TeleControl Server Basic, IEC 60870-5-104 or...
Price on request
| Communications Processor CP 1542SP-1 IRC for connection of an SIMATIC S7-ET 200SP to Industrial Ethernet, SINAUT ST7, TeleControl Server Basic, IEC 60870-5-104 or DNP3 protocol to a control center; Open IE communication (TCP/IP, ISO-on-TCP, UDP), IP broadcast/multicast, SNMPV1, DHCP, secure email, IPv4/IPv6, support of SINEMA Remote Connect with autoconfiguration; time-of-day synchronization via NTP, access to web server of CPU, BusAdapter required. |
| transfer rate | |
| transfer rate | |
| ● at the 1st interface | 10 ... 100 Mbit/s |
| interfaces | |
| number of interfaces / according to Industrial Ethernet | 1 |
| number of electrical connections | |
| ● at the 1st interface / according to Industrial Ethernet | 2 |
| type of electrical connection | |
| ● at the 1st interface / according to Industrial Ethernet | via ET 200SP bus adapter (RJ45, FC, SCRJ), integrated switch |
| supply voltage, current consumption, power loss | |
| type of voltage / of the supply voltage | DC |
| supply voltage | 24 V |
| supply voltage | 19.2 ... 28.8 V |
| power loss [W] | 6 W |
| ambient conditions | |
| ambient temperature | |
| ● for vertical installation / during operation | -30 ... +50 °C |
| ● for horizontally arranged busbars / during operation | -30 ... +60 °C |
| ● during storage | -40 ... +70 °C |
| ● during transport | -40 ... +70 °C |
| relative humidity | |
| ● at 25 °C / without condensation / during operation / maximum | 95 % |
| protection class IP | IP20 |
| design, dimensions and weights | |
| width | 60 mm |
| height | 117 mm |
| depth | 74 mm |
| net weight | 0.18 kg |
| fastening method | |
| ● 35 mm top hat DIN rail mounting | Yes |
| product features, product functions, product components / general | |
| number of units | |
| ● per CPU / maximum | 2 |
| ● note | 2 CPs can be pluged in per CPU, simultaneous operation with BA Send and CM DP is possible |
| performance data / open communication | |
| number of possible connections / for open communication | |
| ● by means of T blocks / maximum | 32 |
| data volume | |
| ● as user data per ISO on TCP connection / for open communication / by means of T blocks / maximum | 65536 byte |
| performance data / S7 communication | |
| number of possible connections / for S7 communication | |
| ● maximum | 16 |
| ● with OP connections / maximum | 16 |
| performance data / multi-protocol mode | |
| number of active connections / with multi-protocol mode | 32 |
| performance data / IT functions | |
| number of possible connections | |
| ● as email client / maximum | 1 |
| performance data / telecontrol | |
| suitability for use | |
| ● node station | No |
| ● substation | Yes |
| ● TIM control center | No |
| control center connection | IEC 60870-5, DNP3, (Modbus TCP by block solutions of the CPU) capable control stations, connection to Telecontrol Server Basic and ST7 capable control station |
| ● by means of a permanent connection | supported |
| ● by means of demand-oriented connection | supported |
| ● note | Connection to SCADA system by IEC 60870-5 104, DNP3, Telecontrol Server Basic and ST7 capable control center |
| protocol / is supported | |
| ● DNP3 | Yes |
| ● IEC 60870-5 | Yes |
| ● SINAUT ST7 protocol | Yes |
| product function / data buffering if connection is aborted | Yes; TCSB 64000 events, SINAUT ST7 32000 telegrams, DNP3 100000 events, IEC 60870-5 100000 events |
| number of data points per station / maximum | 1500 |
| number of stations / for direct communication / with Telecontrol Server Basic | |
| ● in send direction / maximum | 3 |
| ● in receive direction / maximum | 15 |
| product functions / management, configuration, engineering | |
| product function / MIB support | Yes |
| protocol / is supported | |
| ● SNMP v1 | |
Similar products:
Siemens F-CM AS-I SAFETY ST ET 200SP; 3RK7136-6SC00-0BC1
SIMATIC ET 200SP Safety communication module F-CM AS-Interface Safety ST for AS-Interface
-
(Out of stock)
Price on request
Siemens ET 200SP, CM PTP, PU 1; 6ES7137-6AA01-0BA0
SIMATIC ET 200SP, CM PTP communication module for serial connection RS-422, RS-485 and RS-232, freeport, 3964 (R), USS, MODBUS RTU master, slave, max. 250 Kbit/s,
-
(Out of stock)
Price on request
Siemens ET 200SP, CM 4 X IO-Link ST; 6ES7137-6BD00-0BA0
SIMATIC ET 200SP, CM 4xIO-Link ST Communication module IO-Link Master V1.1
-
(Out of stock)
Price on request
Siemens ET 200SP, CM 1x DALI; 6ES7137-6CA00-0BU0
SIMATIC ET 200SP, CM 1x DALI, DALI master module, integrated DALI bus power supply 160 mA, up to 64 DALI control gears, 63 control devices, color code CC20, suitable
-
(Out of stock)
Price on request
Siemens ET 200SP CM CAN; 6ES7137-6EA00-0BA0
ET 200SP, CM CAN Gateway to CAN or CANopen networks, CAN 2.0A/B, CANopen Manager to CiA301/302, CANopen Slave to CiA301/302, IP20
-
(Out of stock)
Price on request
Siemens CM AS-I MASTER ST ET 200SP (AS-I V3.0); 3RK7137-6SA00-0BC1
SIMATIC ET 200SP communication module CM AS-Interface Master ST according to AS-i specification V3.0
-
(Out of stock)
Price on request